2-3.6 Power On - SOYO SY-6VBA 133 User Manual

Pentium iii, pentium ii & celeron processor supported apollo pro133 agp/pci motherboard 66/100/133 mhz front side bus supported atx form factor

Hide thumbs Also See for SY-6VBA 133:

Table of Contents

Hardware Installation

2-3.6 Power On

You have now completed the hardware installation of your Motherboard

successfully.

1. Turn the power on

2. To enter the BIOS Setup Utility, press the <DEL> key while the system

is performing the diagnostic checks,

Note: If you have failed to enter the BIOS, wait until the boot up

sequence is completed. Then push the RESET button and press

<DEL> key again at the beginning of boot-up, during diagnostic

checks.

SY-6VBA 133

Table of Contents

Do you have a question about the SY-6VBA 133 and is the answer not in the manual?