Hard Disk Timeout; Standby Cpu Speed; Save To Disk - Fujitsu D943 Technical Manual

Settings in BIOS Setup

Hard Disk Timeout

Requirement: The
This field defines the amount of time without system activity before the motor of
the hard disk drive is switched off. As soon as there is a hard disk access, the
motor is switched back on.
, ,
2 min 5 min 10 min
Default entry =
The PC does not switch off the hard disk drive.
Disabled

Standby CPU Speed

Requirement: The
This field specifies the processor's clock speed in standby mode. The entries
and
Medium Low
In a network environment the processor's clock speed must be set to
otherwise data transfer will take place at reduced speed.
Maximum clock speed
Max
1/4 of maximum clock speed
High
1/8 of maximum clock speed (default entry )
Medium
1/16 of maximum clock speed
Low

Save To Disk

Requirement: The
sufficient storage space on the hard disk.
This field specifies whether the current system status (active programs, files,
memory contents) is saved to file
suspend mode. This system status is restored when you restart the system; in other
words, you can carry on working in the same application.
The contents of the main memory, working memory, video
Enabled
memory and cache are saved to the hard disk.
The memory contents are not saved (default entry).
Disabled
42
Power Management Mode
,
15 min
10 min.
Power Management Mode
cause programs to run more slowly.
Power Management Mode
Power - power-management features
must be set to
must be set to
must be set to
when the system switches to
SAVETO.DSK
.
Customize
.
Customize
,
Max
. There must be
Customize
A26361-D943-Z120-14-7619
,
High