Fujitsu D943 Technical Manual page 51

Power
The setting only works with:
Enabled
•
Controllers integrated on the system board (e. g. graphics and audio
controllers)
•
Add-on boards indicated in the price list.
Other add-on boards are not supported at present.
Do not set the entry in the
!
boards other than those listed above. This applies, for example, to add-on
boards such as SCSI controllers and graphics controllers.
These restrictions also apply if you activate the
to disk) under Windows using
Before starting the
documents located on network drives.
A26361-D943-Z120-14-7619
Save to Disk
DeskEnergy
function, you should first close all
Save to Disk
Settings in BIOS Setup
field to , if you are using
Enabled
Quickstart
.
function (Save
43