Use As a Matrix Switcher
Saving Settings to MEMORY Buttons
You can save the assignments to [1] through [4].
1.
Finish making the assignments.
Finish the operation for assigning sources to MATRIX OUT.
2.
Save the assignments.
Press and hold for several seconds any one of the [MEMORY] buttons from [1] to [4]. When saving to internal memory starts, all
[MEMORY] buttons flash. When the save operation finishes, the flashing stops.
fig.panel-preset.eps
3.
Call up an assignment.
Pressing the [MEMORY] button you pressed in step 2 calls up the saved state.
Displaying the MAIN MENU lets you use the mouse to call up saved values. Click any of the [MEMORY] buttons from [1] to [4] to call up the saved
state.
You can copy and delete the values saved to [MEMORY] buttons. Refer to "Copying/Resetting Values in Memory" (p. 33).
You can also use the mouse to save settings. At the MAIN MENU, select [UTILITY], then use the [MEMORY WRITE] item to choose the number of
the destination memory for saving. You can save the settings to the selected number by clicking the [WRITE] button.
fig.memory-write.eps
24