Table of Contents
Advertisement
Use As a Multi-Viewer
Switching the Display Mode
When you're using the MVS-12 as a multi-viewer, you can use any of the following four patterns to display the video on monitors
connected to the MULTI-OUT (MENU) connectors. For information on the switching procedures, refer to "Switching Using
Buttons" (p. 17) and "Switching Using a Mouse" (p. 17).
* The numbers from 1 to 12 in the figures below are the input-channel numbers. By default, 1 to 12 are displayed as below.
* By default, when one of the patterns from 2 to 4 is selected, not all channels are displayed. You can use the procedure in "Changing the Display
Location for Channels" (p. 18) to switch displayed channels.
fig.16x9-monitor-out.eps
1
2
5
6
9
10
Pattern 3
11
1
2
5
6
If all the MULTI-OUT buttons are dark, image shown on monitor connected to MULTI-OUT (MENU) will not be split like above. If all the buttons are
dark, one image will be shown on full screen without any split. Press the lit button again to make it dark. You can select the channel to show with
MATRIX OUT 1 button. Refer to "Use As a Matrix Switcher" (p. 22) for use of MATRIX OUT buttons.
16
Pattern 1
3
4
7
8
11
12
12
3
4
7
8
Pattern 2
1
2
4
5
7
8
Pattern 4
1
3
3
6
9
2
4
Advertisement
Table of Contents
