Names Of Things And What They Do; Front Panel - Roland MVS-12 Owner's Manual

Names of Things and What They Do

Front Panel

fig.front-panel.eps
1
1. MOUSE Connector (p. 15)
This allows connection of a commercially available PS/2 mouse. This enables you to use a mouse to perform operations instead of
using the buttons on the front panel.
2. SETUP Buttons (p. 26)
These are used for displaying various menu items and making system settings.
3. INPUT SELECT Buttons (p. 18, p. 22)
You can use these for the two purposes described below.
• When using the unit as a multi-viewer
This lets you specify the display locations of the respective sources.
• When using the unit as a matrix switcher
Using these in combination with the MATRIX OUT buttons lets you select the output channel for each source.
4. MATRIX OUT Buttons (p. 22)
When you're using the unit as a matrix switcher, you can use these to choose the destination channels for output.
5. MULTI-OUT Buttons (p. 17)
When you're using the unit as a multi-viewer, you can use these to switch the display mode.
6. MEMORY Buttons (p. 20, p. 24)
You can use these to save the display mode and the settings for input and output. You can then call up saved settings in a single
step.
7. POWER Button/Indicator (p. 9)
This switches the MVS-12 on and off. The indicator lights up green when the power comes on. When the power is switched off,
the indicator lights up red.
10
2 3 4 5 6 7