Table of Contents
Advertisement
Other Features
Switching the Output Format
Switching from the Menu
At the [SYSTEM SETTING] menu, select the desired output format in the [OUTPUT FORMAT] item. Then, the MVS-12 is then
prepared to change the output format. After clicking the on-screen [OK] button, the message "CHANGING OUTPUT FORMAT. OK?"
appears.
You can use the up, down, left, and right cursor buttons and the [ENTER] button to accomplish the same operations as clicking the screen
buttons.
fig.change-format-dialog.eps
Clicking the on-screen [OK] button switches the output format. Pressing the [MENU] button or clicking the on-screen [CANCEL]
button quits the screen and returns to the original output format. The output format returns to previous automaticcally if you
leave it for 15 seconds or longer.
Switching at Startup
The MVS-12 can switch the output format at startup. Hold down one of the [INPUT SELECT] buttons from [1] to [7] and turn on the
power to switch the output format as indicated below. When the unit starts up with the output format switched, the button you
pressed flashes.
fig.format-change.eps
1600 x 900
1680 x 1050
1920 x 1080
AUTO
1024 x 768
30
1280 x 720
1280 x 1024
1440 x 900
Advertisement
Table of Contents
