Table of Contents
Advertisement
9.1 When Incorrect Copies Are Produced
Symptom
The edge of the copy is dirty.
The image is not aligned
properly on the paper.
Di1811p
Possible Cause
The document pad is dirty.
The selected paper size is
larger than the document
(with a Zoom setting of
×
1.00).
The orientation of the
document is different from
the orientation of the copy
(with a Zoom setting of
×
1.00).
The copy was reduced to a
size smaller than the paper
(with a reduced zoom ratio).
The document is not
positioned correctly.
The document is not
positioned correctly in the
Document Feeder.
The Document Guide
Plates are not slid up
against the edges of the
document.
Curled paper was loaded
into the paper tray.
9
Remedy
Clean the document pad
with a soft cloth dampened
with a mild detergent.
(p. 10-7)
Select a copy paper size
that is the same as the size
of the document. (p. 5-30)
Otherwise, select the Auto
Size function to enlarge the
copy to the selected paper
size. (p. 5-31)
Select a copy paper size
that is the same as the size
of the document.
Otherwise, select a copy
orientation that is the same
as the orientation of the
document.
Select a zoom ratio that
adjusts the copy size to the
size of the selected paper.
(p. 5-30)
Otherwise, select the Auto
Size function to reduce the
copy to the selected paper
size. (p. 5-31)
Correctly position the
document against the
Document Scales. (p. 3-11)
If the Document Feeder is
installed, correctly adjust
the Document Guide Plates
for the size of the
document. (p. 3-9)
Lift open the Document
Feeder, and correctly
position the document
against the Document
Scales. (p. 3-11)
Slide the Document Guide
Plates against the edges of
the document.
Flatten the paper before
loading it.
9-3
Advertisement
Table of Contents
