Interference-Causing Equipment Standard (Ices-003 Issue 3) (For Canada Users); For Users In Countries Not Subject To Class B Regulations; For Users In Countries Subject To Class B Regulations; Laser Safety - Konica Minolta Di1811p User Manual

1.5 Safety Information
INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 3)
(For Canada Users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.

For Users in countries not subject to Class B regulations

WARNING
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

For users in countries subject to Class B regulations

This device must be used with shielded interface cables. The use of non-shielded cable is likely to result
in interference with radio communications and is prohibited under CISPR 22 rules and local rules.
For users in countries not subject to Class B regulations
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
This device must be used with shielded interface cables. The use of non-shielded cable is likely to result
in interference with radio communications and is prohibited under CISPR 22 rules and local rules.

Laser Safety

This is a digital machine which operates using a laser. There is no possibility of
danger from the laser provided the machine is operated according to the
instructions in this manual.
Since radiation emitted by the laser is completely confined within protective
housing, the laser beam cannot escape from the machine during any phase of user
operation.
This machine is certified as a Class 1 laser product: This means the machine does
not produce hazardous laser radiation.
Di1811p
1
1-11