Table of Contents
Advertisement
4
4.1
Specifying a Zoom setting
To enlarge/reduce a standard-sized document to a different standard size
As an example, the following procedure describes how to enlarge a Ledger-size
document to a 11 × 17-size document.
1
Position the document(s) to be copied.
H
Refer to "Loading the Document" on page 3-9.
2
Press the [Zoom] key.
"LG → 11 × 17" appears in the display.
Note
With each press of the [Zoom] key,
the preset zoom ratio that is
displayed changes one setting at a
time.
3
Check the setting for the size of paper
to be printed on.
H
If "AUTO" is displayed, check that
11 × 17-sized paper is loaded into
the paper tray.
H
If "AUTO" is not displayed, press
the [Paper] key until "AUTO" is displayed.
H
For details on changing the paper size setting for the paper tray, refer to
"Setting Up the Paper Sources ("PAPER SOURCE SETUP" Menu)" on
page 7-16.
4-2
4.1 Specifying a Zoom setting
Di1811p
Advertisement
Table of Contents
