Foreword; Important; Explicit Definitions; Fcc Information - Icom IC-F8101 Instruction Manual

FOREWORD

Thank you for purchasing this Icom product. The IC-
F8101
hf transceiver
Icom's state of the art technology and craftsmanship.
With proper care, this product should provide you with
years of trouble-free operation.
We appreciate you making the IC-F8101 your radio of
choice, and hope you agree with Icom's philosophy of
"technology first." Many hours of research and develop-
ment went into the design of your IC-F8101.
D FEATURES
❍ ALE (Automatic Link Establishment)/Sel-
call capability
❍ Digital Signal Processor (DSP) allows flex-
ible filter selection
❍ Full-dot matrix LCD for a variety of infor-
mation

IMPORTANT

READ THIS INSTRUCTION MANUAL
CAREFULLY
before attempting to operate the
transceiver.
SAVE THIS INSTRUCTION MANUAL.
manual contains important safety and operating in-
structions for the IC-F8101.

EXPLICIT DEFINITIONS

WORD
Personal death, serious injury or an
R DANGER!
explosion may occur.
Personal injury, fire hazard or electric
R WARNING!
shock may occur.
CAUTION
Equipment damage may occur.
Recommended for optimum use. No
NOTE
risk of personal injury, fire or electric
shock.
i
is designed and built with
This
DEFINITION

FCC INFORMATION

FOR CLASS A UNINTENTIONAL RADIATORS:
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial
environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual,
may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area
is likely to cause harmful interference in which case
the user will be required to correct the interference at
his own expense.
CAUTION: Changes or modifications to this trans-
ceiver, not expressly approved by Icom Inc., could
void your authority to operate this transceiver under
FCC regulations.
Icom, Icom Inc. and the Icom logo are registered trademarks
of Icom Incorporated (Japan) in Japan, the United States,
the United Kingdom, Germany, France, Spain, Russia and/or
other countries.
All other products or brands are registered trademarks or
trademarks of their respective holders.
Versions of the IC-F8101 which display
the "N33" symbol on the serial number
seal, comply with Standard Australia
Specification No. AS/NZS 4770: 2000.