Power Switch < 4 Sec; System Wake-Up Event; System Sleep Timer; Sleep Mode - Acer Power 6100 User Manual

System Sleep Timer

This parameter automatically puts the system to power-saving mode after a specified period of inactivity. Any
keyboard or mouse action, or any activity detected from the IRQ channels resumes system operation. The default
setting is Off.

Sleep Mode

This parameter lets you specify the power-saving mode that the system will enter after a specified period of
inactivity. The options are Standby or Suspend mode.
This parameter becomes configurable only if the System Sleep Timer is enabled. Any keyboard or mouse action, or
any enabled monitored activity occurring through the IRQ channels resumes system operation.
3.6.2 Power Switch < 4 sec.
When set to Power Off
Suspend, the system enters the suspend mode. The default setting is Power Off.
3.6.3

System Wake-Up Event

This parameter lets you specify the activity that will resume the system to normal operation.
Modem Ring Indicator
When Enabled, any fax/modem activity wakes the system from Sleep mode. The default setting is Disabled.
3.7 Boot Options
This option allows you to specify your preferred settings for bootup.
,
the system automatically turns off when the power switch is pressed. When set to
Index
lxxv