Power Switch < 4 Sec; System Wake-Up Event - Acer 6000 User Manual

allow 3 to 5 seconds (depending on the hard disk) for the disk to return to normal
speed. Set this parameter to
System Sleep Timer
This parameter automatically puts the system to power-saving mode after a
specified period of inactivity. Any keyboard or mouse action, or any activity
detected from the IRQ channels resumes system operation.
Sleep Mode
This parameter lets you specify the power-saving mode that the system will enter
after a specified period of inactivity. The options are
This parameter becomes configurable only if the System Sleep Timer is enabled.
Any keyboard or mouse action, or any enabled monitored activity occurring
through the IRQ channels resumes system operation.
3.6.2 Power Switch < 4 sec.
When set to
Power Off,
switch is pressed. When set to
3.6.3

System Wake-Up Event

This parameter lets you specify the activity that will resume the system to normal
operation.
Modem Ring Indicator
When , any fax/modem activity wakes the system from Sleep mode.
Enabled
3-20 AcerPower 6000 User's Guide
if your hard disk does not support this function.
Off
the system automatically turns off when the power
, the system enters the suspend mode.
Suspend
or
Standby Suspend
mode.