Acer Power 6100 User Manual page 38

Table 1-1 System Error Messages (continued)
Error Message
Onboard Serial 1 Conflict
Onboard Serial 2 Conflict
Onboard Parallel Port
Conflict
PS/2 Pointing Device
Error
PS/2 Pointing Device
Interface Error
Press F1 key to continue
or Ctrl-Alt-Esc for Setup
Press Esc to turn off
NMI, any key to reboot
Protected Mode Test Fail
RAM BIOS Error
Real Time Clock Error
Shadow RAM Fail
System Memory Address
Error
AcerPower 6100 (V66M/H61) User's Guide
xxxviii
Corrective Action
Run Setup and disable Onboard Serial
1. See Chapter 3.
Run Setup and disable Onboard Serial
2. See Chapter 3.
Run Setup and disable Onboard
Parallel Port. See Chapter 3.
Check or connect the pointing device.
Contact your dealer.
Contact your dealer.
Press or
Check CMOS setup configuration.
Memory Parity may be enabled.
Press to disregard NMI error.
Press any key to reboot the system.
Contact your dealer.
Contact your dealer.
Run Setup. See Chapter 3.
Contact your dealer.
Check DIMMs on system board or
contact your dealer.
.