Chapter 3
Most systems are already configured by the manufacturer or the dealer. There is no need to run Setup when
starting the computer unless you get a Run Setup message.
The Setup program loads configuration values into the battery-backed nonvolatile memory called CMOS RAM.
This memory area is not part of the system RAM.
3.1
Entering Setup
To enter Setup, press the key combination
AcerPower 6100 (V66M/H61) User's Guide
lii
BIOS Utility
If you repeatedly receive Run Setup messages,
the battery may be bad. In this case, the system
cannot retain configuration values in CMOS. Ask
a qualified technician for assistance.
You must press
while the system is booting. This key combination
does not work any other time.
+
+
.
simultaneously