PCI IRQ Setting
Select Auto to let BIOS automatically configure the plug-and-play (PnP) devices installed in your system.
Otherwise, select Manual
Refer
information about the PCI card.
PCI Slots
When you set the PCI IRQ Setting parameter to Auto, these parameters specify the auto-assigned interrupt for each
of the PCI devices. If you set the PCI IRQ Setting parameter to Manual, you need to specify the interrupt that you
want to assign for each PCI device installed in your system.
PCI IRQ Sharing
Setting this parameter to Yes allows you to assign the same IRQ to two different devices. To disable the feature,
select No.
If there are no IRQs available to assign for
the
recommend that you enable this parameter.
.
to
your
manual
remaining
device
for
technical
function,
we
Index
lxxxix