Silent Boot; Num Lock After Boot; Memory Test; Configuration Table - Acer Power 6100 User Manual

3.7.4

Silent Boot

This parameter enables or disables the Silent Boot function. When set to Enabled, BIOS is in graphical mode and
displays only an identification logo during POST and while booting. Then, the screen displays the operating
system prompt (as in DOS) or logo (as in Windows 95).
automatically switches to the text mode.
Even if your setting is Enabled, you may also switch to the text mode while booting by pressing
When set to Disabled, BIOS is in the conventional text mode where you see the system initialization details on the
screen.
The default setting is Disabled.
3.7.5

Num Lock After Boot

This parameter allows you to activate the Num Lock function upon booting. The default setting is Enabled.
3.7.6

Memory Test

When set to Enabled, this parameter allows the system to perform a RAM test during the POST routine. When set
to Disabled, the system detects only the memory size and bypasses the test routine. The default setting is
Disabled.
3.7.7

Configuration Table

This parameter allows you to enable or disable the display of the configuration table after POST but before booting.
The configuration table gives a summary of the hardware devices and settings that BIOS detected during POST.
This parameter appears only when you are in the Advanced Level.
The default setting is Enabled.
If any error occurred while booting, the system
Index
.
lxxvii