Sleep Mode
This parameter allows you to specify the power-saving mode that the system will
enter after a specified period of inactivity. The options are Standby or
Suspend mode.
This parameter becomes configurable only if the System Sleep Timer is
enabled. Any keyboard or mouse action or any enabled monitored activity
occurring through the IRQ channels resumes system operation.
Power Switch < 4 sec.
When set to Power Off, the system automatically turns off when the power
switch is pressed. When set to Suspend, the system enters the suspend mode.
System Wake-Up Event
This parameter allows you to specify the activity that will resume the system to
normal operation.
Modem Ring Indicator
When Enabled, any fax/modem activity wakes the system from Sleep mode.
Chapter 2
31