Oven Compartment Components; Oven Rack; Oven Rack Guide; Oven Light Components - Wolf Ranges Technical & Service Manual

30/36/48/60 inch ranges; 36/48 inch rangetops
Hide thumbs Also See for Ranges:
Table of Contents

Advertisement

Component Access & Removal

Oven Compartment Components:

Oven Rack Removal
To remove an oven rack, pull the rack forward until it
stops. Then, lift the front of rack to about a twenty-five
degree angle and continue to pull the rack forward and
out of the oven compartment. (No Diagram)
Oven Rack Guide Removal
The tops of the oven rack guides are hooked up into
holes in the side walls, then the bottom of the rack
guides are lowered down into holes in the bottom oven
panel.
To remove an oven rack guide, lift it straight up, then
pivot the bottom towards the center of the oven. Now,
pull the rack guide down out of the holes in the side
wall and out of the oven. (No Diagram)
Oven Light Components Removal
To access and remove the light components, begin by
unscrewing the light lens. The light bulb can now be
removed by unscrewing it from the light socket. (See
Figure 3-29)
In order to remove the light socket, the unit must be
pulled from its installation and the back panel removed.
Then, disconnect the electrical leads from the socket
terminals. With a small flat-blade screwdriver gently
expand the metal tabs on each side of the ceramic
socket and pull the socket out of the lamp base. (See
Figure 3-29)
Oven Convection Fan Removal
The convection fan assembly is held to the back wall
with screws. The fan cover is positioned in front of the
fan assembly and also held to the back wall with
screws.
To remove the fan assembly, first extract the fan cover
mounting screws and pull the cover from the oven.
Then, extract the fan assembly mounting screws and
pull the fan assembly forward slightly. Disconnect the
fan's electrical leads and pull the fan assembly from the
oven. (See Figure 3-30)
Oven Bottom Panel Removal
To remove the bottom oven panel, extract the screws at
the front and back, then lift the panel up and out of the
oven. (See Figure 3-31)
RANGES & & R R ANGETOPS
Socket
Figure 3-29. Light Components Removal
Figure 3-30. Convection Fan Removal
Figure 3-31. Bottom Panel Removal
4-12
Lens
Bulb
Fan
Assembly
Fan Cover
Bottom
Panel

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents