Assigning The Output Signals - Panasonic AV-HS450E Operating Instructions Manual

4. Input/output signal settings

4-3-1. Assigning the output signals

Assign the output signals to OUTPUT1 to OUTPUT10.
 Press the [OUTPUT] button to light its indicator and display the OUTPUT menu.
 Refer to "2-1-5. LCD menu area".
 Turn [F1] to display the OUTPUTYY sub menu.
(Y: OUT1 to OUT6, A1, A2, B1 or B2)
The output used to assign the output signal is selected for Y.
 Turn [F2] to display the Asign sub menu.
<Menu display>
OUTPUTYY | Asign
| 1/2
 Turn [F3] to set the type of output signal using the Sourceitem.
PGM: An image provided with the wipe, mix, key, downstream key or other effect is output at the
switcher's main line output.
PVW: This is the preview output that enables the next operation to be checked before it is
executed.
AUX1 to 4: The signals selected by the AUX bus in lines 1 to 4 are output.
CLN: The clean signal (the image resulting when the key, downstream key or other effect has
been removed from the PGM signal) is output.
 Refer to "Assigning the CLN signal".
MV1, MV2: The multi view display signals in two lines are output.
Multiple input signals and output signals are reduced in size and output to one screen.
KeyOut: The key signal is output.
| Source | Mode↓ |
| PGM|  Normal|
PVW DC
CLN
AUX1-4
MV1,MV2
KeyOut
114