4-4-. Assigning The Output Signals - Panasonic AV-HS400AE Operating Instructions Manual

4. Input/output signal settings
4-4-2. Assigning the output signals
Assign the output signals to OUTPUT1 to 6.
1 Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.
2 Turn [F1] to display the Output sub menu.
3 Turn [F] to select the signal name using the Signal item, and turn [F3] to set the type of output signal using
the Output item.
<Menu display>
Output Signal
2/15 OUT1
OUT1-6
4 When the SDI output board (option) has been connected, turn [F4] to set the output mode using the Mode
item, and press the [F4] switch to enter the setting.
An asterisk () appears on the left of the currently selected output mode.
Normal:
The same signals as the system format signals are output.
DC (down-converter):
When the system format is 1080/9.94i or 70/9.94p, the signals are output in the 480/9.94i format.
When the system format is 1080/0i or 70/0p, the signals are output in the 76/0i format.
When the system format is SD (480/9.94i or 76/0i), this setting cannot be selected.
Output Mode↓
PGM Normal
PVW DC
AUX
Multi
KEYOut
70