Mac operating system
Mac operating system
USB, when used with a Mac running OS® X (version 10.7 or later), is a 'plug and play'
device. So, unlike on a PC running Windows® 7, there is no need to install a USB
device driver. Also, this Mac version has its own interface for using the supplied third
party recording software.
Note: The settings available for configuration may be dependent on a number of
variables, such as the hardware specification of the Mac, the recording software
application, etc. So, the setting you may want to adjust may be available for change in
the recording software application itself.
Configuring the supplied third party recording software
In general, you should be able to use your recording software application on your Mac
quite successfully using the default settings. However, you can change these settings if
desired (for example, if you have audio problems), which is done in the Preferences
command of the Reason menu.
1
2
Typical Mac desktop display showing with the recording software in use
Item
1
2
VeniceU
Operator Manual
Element
Reason menu. This is the supplied third party recording software.
Preferences command. This command opens an Audio??? panel
containing all controls, settings, etc., for configuring the audio recording.
29