Monitors - Midas VeniceU16 Operator's Manual

Monitors

Monitors
There is an output connector and insert connector on the rear panel for both monitor
bus outputs.
Two monitor inserts and two monitor outputs on rear panel
Monitor channels (1 and 2)
Item
1
2
3
4
VeniceU
Operator Manual
Description
pre switch This is the bus master pre-fader switch.
monitor control knob
adjustment of the monitor output signal from +10dB to
MUTE switch and red LED
output signal. The mute LED illuminates to show that the mute is on.
SOLO switch and yellow LED The SOLO switch routes the monitor send
signal to the mono PFL bus and stereo AFL buses. When the SOLO switch is
on, the master meters are automatically used for solo metering. The solo
LED illuminates to show when solo is on.
1
2
3
4
This output level control gives continuous
The MUTE switch mutes the monitor send
67
4 (infinity/off).