Midas VeniceU16 Operator's Manual page 30

20
3
In the User Account Control dialog
box, click Yes.
4
In the "Welcome ..." screen of the
Setup dialog box, click Next.
5
In the "Choose Install Location" screen
of the Setup dialog box, choose the
destination of the USB driver and click
Install.
The installation will begin.
6
During the installation procedure the
following dialog box will appear. Plug
the USB cable into the VeniceU console
(type B connector) and into your PC
(type A connector). Then switch on the
console and click OK in the dialog box.
Chapter 3: Using The VeniceU With USB
VeniceU
Operator Manual