Engine Starting Methods - KYMCO Agility 50 Driver Manual

5. ENGINE STARTING METHODS

5. ENGINE STARTING METHODS
(1) TURN THE IGNITION SWITCH "ON" (1) TURN THE IGNITION SWITCH "ON"
Unlock the steering handlebar. Unlock the steering handlebar.
Turn the ignition switch to the "ON" position. Turn the ignition switch to the "ON" position.
CAUTION:
Check the gasoline volume and engine oil level before Check the gasoline volume and engine oil level before
starting the engine. starting the engine.
Be sure to erect the main stand while starting the engine. Be sure to erect the main stand while starting the engine.
Before starting the engine,the side stand shall be kicked Before starting the engine,the side stand shall be kicked
up to secure safety. up to secure safety.
(2) LOCK THE REAR WHEEL (2) LOCK THE REAR WHEEL
Apply the rear brake lever to connect the power for starting. Apply the rear brake lever to connect the power for starting.
CAUTION:
In order to prevent the motorcycle from rushing out at high In order to prevent the motorcycle from rushing out at high
speed, make sure to lock the rear wheel. speed, make sure to lock the rear wheel.
If free play of the rear brake lever is incorrect,the rear If free play of the rear brake lever is incorrect,the rear
wheel cannot be braked and it will cause danger easily. wheel cannot be braked and it will cause danger easily.
－ － － －
18 18