How To Stop Riding - KYMCO Agility 50 Driver Manual

8. HOW TO STOP RIDING

8. HOW TO STOP RIDING
(1) WHILE GO NEAR THE PARKING PLACE (1) WHILE GO NEAR THE PARKING PLACE
Turn on the turn signal light in advance. Watch out Turn on the turn signal light in advance. Watch out
vehicles coming behind or aside and stop the motorcycle vehicles coming behind or aside and stop the motorcycle
to the right side slowly. to the right side slowly.
Restore the throttle grip to closed position and apply the Restore the throttle grip to closed position and apply the
front(brake) level and rear brake pedal as soon as possible. front(brake) level and rear brake pedal as soon as possible.
At this moment, the stoplight will come on to warn the At this moment, the stoplight will come on to warn the
vehicles coming behind. vehicles coming behind.
(2) WHILE THE MOTORCYCLE IS COMPLETELY (2) WHILE THE MOTORCYCLE IS COMPLETELY
STOPPED STOPPED
Return the turn signal switch to its original position. Return the turn signal switch to its original position.
Turn the ignition switch key to the "OFF" position to stop Turn the ignition switch key to the "OFF" position to stop
the engine. the engine.
CAUTION:
During riding, never operate the ignition switch key. During riding, never operate the ignition switch key.
When the ignition switch key is turned to the"OFF" When the ignition switch key is turned to the"OFF"
position, the electric system does not work. Turn off the position, the electric system does not work. Turn off the
ignition switch key after the motorcycle is fully stopped. ignition switch key after the motorcycle is fully stopped.
－ － － －
26 26