Use The Electric Starter Button - KYMCO Agility 50 Driver Manual

(3) USE THE ELECTRIC STARTER BUTTON

(3) USE THE ELECTRIC STARTER BUTTON
Push the electric starter button without rotating the Push the electric starter button without rotating the
throttle throttle grip. grip.
If the engine fails to start after the electric starter If the engine fails to start after the electric starter
button is pressed for 3-4 seconds, rotate the button is pressed for 3-4 seconds,
throttle grip for 1/8-1/4 turn to facilitate starting. throttle grip for 1/8-1/4 turn to facilitate
When the motorcycle is not used for a long time or When the motorcycle is not used for a long time or
the fuel tank is empty, if the engine is still hard to the fuel tank is empty, if the engine is still hard to
start after the start after the fuel tank is refilled with gasoline, push fuel tank is refilled with gasoline, push
down the choke knob, slightly turn the throttle grip down the choke knob, slightly turn the throttle
and push the electric starter button for several times and push the electric starter button for several times
to start the engine. to start the engine.
In order to avoid battery overcharge, do not push the In order to avoid battery overcharge, do not push the
starter button more than 5 seconds. starter button more than 5 seconds.
If the engine does not start after the electric starter If the engine does not start after the electric starter
button is pushed for 5 seconds, wait for more than 5 button is pushed for 5 seconds, wait for more than 5
seconds and then push the button again or start the seconds and then push the button again or start the
engine by the kick engine by the kick lever. lever.
CAUTION:
Don't push the electric starter button while the engine is Don't push the electric starter button while the engine is
running; otherwise the engine will be damaged. running; otherwise the engine will be damaged.
When starting the engine,the rear brake lever must be When starting the engine,the rear brake lever must be
applied to connect power and the stoplight will come on applied to connect power and the stoplight will come on
when power is connected. when power is connected.
rotate the
starting.
grip
－ －
19 19
－ －