Easy Maintenance; Air Cleaner Inspection And Air Cleaner Cleaning&Replacement - KYMCO Agility 50 Driver Manual

Hide thumbs Also See for Agility 50:

Table of Contents

9. EASY MAINTENANCE

(1) AIR CLEANER INSPECTION AND AIR CLEANER

CLEANING & REPLACEMENT

Take out the air cleaner and visually check if it is dirty or

clogged.

1.Remove the screws attaching the air cleaner cover and

remove the air cleaner cover.

2.Remove the air cleaner element.

3.The installation sequence is the reverse of removal.

Soak the element in clean engine oil and squeeze out the excess oil

and then install the element and air cleaner. Replace the air cleaner

element at very 2000km. The air cleaner requires more frequent

cleaning or replacing when ridden in unusually dusty areas. When

replacing, refer to P40 Periodic Inspection & Maintenance Schedule.

CAUTION:

Never use oil or solvent to wash the wet type paper

element.

Be careful not to allow water to enter the air cleaner;

otherwise it may result in hard starting.

If the air cleaner is not installed properly, dust may be

sucked into the cylinder directly to reduce engine

horsepower and affect the service life of engine.

－

Screw

Table of Contents

Show Quick Links

Table of Contents