Golden Blount EL GRANDE HD5030-TV Installation And Operating Instructions Manual page 9

Top-vent fireplace
Hide thumbs Also See for EL GRANDE HD5030-TV:
Table of Contents

Advertisement

The Refractory Brick Panels should be carefully removed from shipping sleeve and positioned
upright against a stable object.
1. Look into fireplace opening and locate back
panel retaining clip positioned against rear
wall of fireplace. (Figure 9.1) Remove (2)
screws attaching clip to rear wall and set
clip and screws aside. Position rear panel
against rear wall and reattach clip with (2)
screws.
2. Locate left panel retaining clip and remove
(2) screws and set clip and screws aside.
Position left panel against left wall and
reattach clip with (2) screws.
3. Repeat Step 2 for right panel installation.
The Exhaust Diverter prevents exhaust gases from entering the room.
1. Locate screws attached to front side top of
interior firebox and remove. (Figure 9.2)
2. Position Exhaust Diverter into fireplace and
attach Diverter using screws removed
earlier. Diverter shold be positioned as
shown. (Figure 9.3)
REFRACTORY PANEL INSTALLATION
EXHAUST DIVERTER INSTALLATION
9
Figure 9.1
Figure 9.2
Figure 9.3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents