User Manual - Lindy 38243 User Manual

User Manual

Remote Control
Red Off Button – This off button will put the switch in stand-by mode only
Green On Button – This button will take the switch out of stand-by mode
1,2,3 or 1,2,3,4,5 – Directly select the input channel you want to display
Up/Down Buttons - The up button will scroll up through the ports, the down
button will scroll down though the ports
RS232 Control Codes
Baud Rate 9600bps
Data Bits 8 Bits
Parity None
Stop Bits 1 Bit
Flow Control None
RS232 Command
Command HEX
!get_com# 21 67 65 74 5f 63 6f 6d 23
!set_off# 21 73 65 74 5f 6f 66 66 23
!set_on# 21 73 65 74 5f 6f 6e 23
!sw_1# 21 73 77 5f 31 23
!sw_2# 21 73 77 5f 32 23
!sw_3# 21 73 77 5f 33 23
!sw_4# 21 73 77 5f 34 23
!sw_5# 21 73 77 5f 35 23
Feedback
!fb_set_xx# (xx= on /off)
!fb_sw_x#(x=1~3)
!fb_set_off#
!fb_set_on#
!fb_sw_1#
!fb_sw_2#
!fb_sw_3#
!fb_sw_4#
!fb_sw_5#
English
Description
Power status
Input port status
Power off
Power on
Switch 1(port)
Switch 2(port)
Switch 3(port)
Switch 4(port)
Switch 5(port)