Waterproof Processing Of Cable And Connection; Function And Operation - Vision VN7XFHD Instruction Manual

- Push up or down the Tack SW (OSD Key) by finger for a second.
Up  Zoom in
Down  Zoom out
Left/Right  Focus in/out
5-6. Waterproof processing of cable end connection
Make sure to use a butyl tape. (Do not use a sealing material on those parts)
① It is useful to connect the cable ends from camera to the extension cable for waterproof.
② Connect and tape the power cables (Power-Power/Ground-Ground).
③ Bind the power cables together with the tape. When DC-Jack is used, tape the DC-DC joint.
④ Connect and tape the RS485 cables (RS485+ㅡTRX+ /RS485- ㅡTRX-)
⑤ Tape the BNC-BNC joint.

6. Function and operation

8