Installation; How To Mount To Ceiling; How To Install To Wall; 3-Axis Adjustment - Vision VN7XFHD Instruction Manual

5. Installation

5-1. How to mount to Ceiling

①
Drill three screw holes on the ceiling plate to fix three anchors (supplied) in the holes.
②
Fix the plastic anchors in the holes.
③
Position the mounting bracket on the screw points.
④
Fix the mounting bracket by tightening the screws.
⑤
Slightly loosen bolt (A) then adjust TILT (180°) and rotation (360°) of the camera using a
serration on the bracket and tighten the bolt firmly.
⑥
Slightly loosen bolt (B) then adjust pan (360°) of the camera and tighten the bolt firmly

5-2. How to install to Wall

①
Drill three screw holes on the wall plate to fix three plastic anchors (supplied) in the holes.
②
Fix the plastic anchors in the holes.
③
Position the mounting bracket on the screw points.
④
Fix the mounting bracket by tightening the screws.
⑤
Slightly loosen bolt (A) then adjust tilt(180˚) and rotation(360˚) of the camera using a
serration on the bracket and tighten the bolt firmly.
⑥
Slightly loosen bolt (B) then adjust pan(360˚) of the camera and tighten the bolt firmly.

5-3. 3-Axis adjustment

6