Video Out; Auto Menu - Vision VN7XFHD Instruction Manual

Please keep the selection until you get to the mode you wish to operate.
4. When completed, move the bar indicator to 'EXIT' and press the button to finish the setting.

6-3. VIDEO OUT

(1) VIDEO OUTSIZE
- VIDEO OUTSIZE can be set to 1080P, 1080i, 720P according
to Local Regulation.
(2) FRAME RATE
- Six modes of 60/59.94/50/30/29.97/25 can be selected.
(3) CVBS OUT MODE
- CVBS output can be set to NTSC or PAL according to
local TV standard.
☞ NOTE
In case of 1080i mode, only 3 types of Frame rate are
available and they are 60/50/59.94 respectively.
When you use 1080P 60 mode, please check your DVR or
related HD devices first whether they support this mode or not. ( In this mode, cable connection
distance is less than half of 1080P 30 mode.)
6-4. AUTO MENU SET
(1) NORMAL
- Sets as initial factory default value.
(2) 50HZ INDOOR
- For indoor use in 50HZ (PAL) environment.
(In this mode, i.e. 50HZ INDOOR MODE, FLICKERLESS changes
automatically into 50HZ mode from initial OFF mode.)
(3) 60HZ INDOOR
- For indoor use in 50HZ (PAL) environment.
(In this mode, i.e. 60HZ INDOOR MODE, FLICKERLESS changes
automatically into 60HZ mode from initial OFF mode.)
(4) OUTDOOR
- For outdoor use.
(In this mode, i.e. OUTDOOR MODE, AWB changes
automatically into PUSH mode from initial ATW mode.)
(5) AUTOSET RESET
- When set as ON and press SET KEY, it turns into
AUTOSET NORMAL MODE automatically, which means
10