Table of Contents
Advertisement
Ice and water system (all models)
Problem
Ice maker is not
producing ice.
Water filter
indicator light is on
(red).
Possible causes
Ice maker arm is up.
Household water supply is
not reaching water valve.
Tubing has kinks.
Water pressure is too low.
Check freezer temperature.
Ice bin is not installed
properly.
Improper water valve was
installed.
Water filter (if fitted) needs
to be replaced.
Filter indicator sensor
needs to be reset.
Troubleshooting
What to do
Confirm ice maker arm is down.
See 'Automatic ice maker' , page 26.
See 'Connecting the water supply' ,
page 9.
Turn off water supply and remove kinks.
If kinks cannot be removed, replace tubing.
Water pressure must be between 35 to 100
pounds per square inch to function properly.
A minimum pressure of 35 pounds per
square inch is recommended for refrigerators
with water filters.
See pages 11 or 16 to adjust controls. Freezer
must be around -18˚C to produce ice.
See page 26 to remove and install the ice
storage bin.
See 'Connecting the water supply' , page 9.
Self-piercing and 4.7 mm saddle valves
cause low water pressure and may clog
the line over time. The manufacturer is not
responsible for property damage due to
improper installation or water connection.
If filter is not available, replace with bypass
cap. See 'Water filter' , page 29.
See 'Filter change and reset' , page 29.
45
Advertisement
Table of Contents
