Brother HL-4040CN Service Manual page 178

(5) Remove the Collar 3 from the Hinge shaft R, and then remove the Hinge shaft R from the
Hinge plate R.
(6) Remove the Front door unit ASSY from Frame unit.
Hinge plate R
Hinge shaft R
Assembling Note:
- When assembling the Wire rope onto the Shaft on the main body, be careful of the direction
of Wire rope referring to the figure below.
Shaft
Frame unit
Collar 3
Fig. 3-88
Wire rope
Retaining ring E3 Shaft
Fig. 3-89
3-70
Front door unit ASSY
<Front side>
Wire rope
Retaining ring E3
Confidential