Brother HL-4040CN Service Manual page 90

(17) Remove the seven cup S M3x6 SR Taptite screws, and then remove the four Scanner
holders and Laser unit.
Taptite, cup S M3x6 SR
Taptite, cup S M3x6 SR
Taptite, cup S M3x6 SR
Scanner holder
Scanner holder
<Installing Procedure>
(1) Assemble the Laser unit with the four Scanner holders and seven cup S M3x6 SR Taptite
screws.
Note:
When assembling the Laser unit and Scanner holder, refer to the figure below.
Taptite, cup S M3x6 SR
Taptite, cup S M3x6 SR
Scanner holder
Scanner holder
Fig. 2-22
Taptite, cup S M3x6 SR
Fig. 2-23
2-14
Scanner holder
Laser unit
Taptite, cup S M3x6 SR
Scanner holder
Frame unit
<Front side>
Scanner holder
Laser unit
<Front side>
Taptite, cup S M3x6 SR
Scanner holder
Frame unit
Confidential