Charge Hvps Pcb Assy - Brother HL-4040CN Service Manual

8.59 Charge HVPS PCB ASSY

(1) Remove the cup S M3x6 Taptite screw and two bind B M4x12 Taptite screws, and then
release the four Hooks to remove the Charge HVPS PCB ASSY from the Frame unit.
Hook
Positioning pin
(2) Disconnect the eight connectors and flat cable from the Charge HVPS PCB ASSY.
Note:
When disconnecting the connectors, they may be damaged if pulling the Charge HVPS
PCB ASSY by force.
CN9
CN3
CN1
Hooks
Fig. 3-173
CN5
CN6
Fig. 3-174
3-117
Frame unit
<Right side>
Taptite, cup S M3x6
Charge HVPS PCB ASSY
Taptite, bind B M4x12
Charge HVPS PCB ASSY
CN7
CN8
CN2
Taptite, bind B M4x12
CN4
Confidential