Waste Toner Near/Full Sensor Assy - Brother HL-4040CN Service Manual

8.34 Waste Toner Near/Full Sensor ASSY

(1) Move the Positioning pin 1a as shown, and slide the Hooks to the direction of the arrow 1b,
and then remove the Waste toner sensor holder from the Middle plate.
Positioning pin
Hook
(2) Release the Hook to remove the Waste toner sensor cover from the Waste toner sensor
holder.
<Left side>
1a
Middle plate
Fig. 3-106
Waste toner sensor cover
Fig. 3-107
Waste toner sensor holder
1b
1b
Hook
Waste toner sensor holder
3-80
Middle plate
Hook
<Front side>
* Figure of the front view
Hook
Confidential