Harness Cover Mp - Brother HL-4040CN Service Manual

Assembling Note:
- When assembling the Front door unit ASSY onto the Hinge on the main body, make sure to
align the Front door unit ASSY with the Hinge as shown in the figure below.

8.27 Harness Cover MP

(1) Remove the cup S M3x6 Taptite screw, and then remove the Harness cover MP from the
Front door unit ASSY.
Frame unit
Hinge
Front door unit ASSY
<Front side>
Fig. 3-90
Taptite, cup S M3x6
Front door unit ASSY
Fig. 3-91
3-71
Hook
Harness cover MP
Confidential