Plu Programming - Samsung SER-6500II Series Operator's Manual

PLU Programming

PLUs may be assigned a number of up to 14 digits, in order to accommodate scanning of UPC
codes.
To register a sale, PLU entries may be made by entering the PLU number and pressing the
PLU key, scanning an item, which enters the UPC number as the PLU number, or pressing a
key on the keyboard (an NLU, or Number Look Up) which has been assigned a PLU number.
Regardless of the entry method during a sale, all PLUs prices and descriptors are programmed
in two steps:
1) Program 200 - PLU HALO/Preset Price
2) Program 300 - PLU Descriptors
IRC Program Transfer of PLUs
Once an IRC system has been established, any changes made to the PLU file (price or
descriptor changes) at any register will be automatically broadcast to all other registers in the
system.
Preparation
All PLUs require a PLU number, or code, by which they are identified. PLU codes may be
from one to fourteen digits long, and do not have to be programmed in any particular order.
90 • P-Mode Programming
SER-6500II/6540II Program Manual