Error Messages - Samsung SER-6500II Series Operator's Manual

Error Messages

The Samsung SER-6500II/6540II displays many different error messages. Many messages are
self explanatory, and are displayed in order for the operator to correct the error. Some prompt
the operator to complete a procedure before continuing (inserting a slip for validation is one
example). Others simply identify illegal key sequences, which may be corrected by re-entering
the key sequence correctly.
Many of the display prompts and error displays may be custom programmed. The following
list provides the default message programmed, and a brief description of the procedures which
cause the message to be displayed.
Message
BUFF. FULL
AMOUNT REQ!
NO PLU!
HALO OVER!
INACTIVE!
F-STAT ERR
REQ GAL AMT
NEGATIVE
REQ COND!
NOT PGMMED!
OVERRIDE X
SER-6500II/6540II Program Manual
Description
The buffer for soft check, hard check, or buffered receipt has reached
capacity. For hard checks, the operator must press the SERVICE
key to print the items and clear the buffer. The operator must then
pick up the previous balance again in order to continue.
In a soft check environment, this message will appear when the check
has reached capacity (maximum lines stored). The register will
maintain the correct ballance, but does not print additional items and
will give the BUFF. FULL error after each additional item.
This operation requires an amount entry.
The number entered is not a valid PLU. This message will also
appear if an NLU number "built" using size and modifier keys recalls
an invalid PLU number.
The amount entered exceeds the programmed HALO.
The keyspace pressed is inactive. This message also appears if
VOID Mode has been disabled.
Function key status being entered is illegal (P-Mode).
This entry involves a gallonage PLU, and requires an amount entry.
This sale has gone negative. The register has been programmed to
not allow negative sales.
This PLU has been programmed to require a condiment entry.
This key has not been programmed
The key lock has to be moved to the X-Mode position in order to
override a HALO amount, or other restriction.
Introduction • 11