X-Mode Programming; Introduction; X-Mode Override / Manager Mode - Samsung SER-6500II Series Operator's Manual

X-Mode Programming

Introduction

X-Mode programming for the Samsung SER-6500II/6540II may also be considered Manager
programming, since many of the functions may fall under the responsibility of the store
manager.
X-Mode programming involves setting the default size and modifier levels (for pop-up mode),
signing in and out of training mode, turning the receipt print on and off, and cash declaration
procedures.

X-Mode Override / Manager Mode

Certain function keys (Void, R/A, P/O, Refund, etc.) may be programmed to require the
keylock turned to the "X" position before they will operate. If an attempted operation results in
a "MANAGER" error prompt, the keylock must be turned to the "X" (Manager) position and
the operation repeated.
Certain entry limits may also be programmed to allow higher entries when the key is turned to
the "X" position. This is referred to as X-Mode override. Ask your dealer and/or Store
Manager to list the keys affected in Manager Mod
80 • X-Mode Programming
SER-6500II/6540II Program Manual