Display - Samsung SER-6500II Series Operator's Manual

Display

The Samsung SER-6500II comes with a two line (twelve digit alpha over ten digit numeric)
front display standard.
Silk screened on the display window are:
•
•
•
•
•
•
•
•
The front display features a second line of up to twelve alpha characters. These descriptors
help the operator by supplying additional information while operating the register, and may be
accompanied by an error tone.
SER-6500II/6540II Program Manual
The RPT symbol designates the area the counter appears when multiple entries are
made to the same item key.
The AMOUNT area is reserved for the price field.
The DESCRIPTOR symbol defines the alpha descriptor display area
RCPT OFF is illuminated when the receipt has been programmed off.
VALID requires the validation of a form. This symbol lights when the form is
properly aligned, covering the activated sensors in the printer.
D1, D2, and D3 indicate which cash drawer the current cashier is assigned to.
Cashiers are assigned a drawer in
P-Mode programming, and may only open their designated cash drawer.
FS, TX1, TX2, TX3, and TX4 designate the applicable tax and Food Stamp
eligibility, and are illuminated appropriately for each PLU registered and displayed.
Introduction • 9