Programming Note; Service Mode Programming; Ram Clearing; Initial Clear - Samsung ER-51XX Programming & Operating Manual

PROGRAMMING NOTE

This ECR ( Electronic Cash Register ) 's programming is easy.
In this manual, the programming steps are explained with flow chart boxes.
Each box represents a key on the keyboard.
The flow chart shows each key stroke you need to complete the programming.
Enter the keys in the flow chart from left to right.
DEFAULT PROGRAM : This machine arrives with a default or " generic"
Program options are set to 0(zero), unless otherwise noted, which means
the machine is operational right out-of-the-box.

1 SERVICE MODE PROGRAMMING

Service mode programming is the initial programming that is required when the register is new "out-of-the-
box".
Service mode programming is also used to return the register to this condition.

1.1 RAM CLEARING

1.1.1 INITIAL CLEAR

Keyboard lock-ups and constant error conditions may be cleared by the following procedure.
This procedure will not effect register programming, or clear previously stored totals in RAM memory.
( 1 ) Turn the keylock to the ' P'
( 2 ) While holding the " SUBTL"
Continue to hold the " SUBTL"
display shows 0.00.
position and press the " SUBTL"
key down, power the register off, and back on.
key down until the receipt printer stops printing and the
* INITIAL CLEAR *
program already installed.
key.
17