Table of Contents
Advertisement
KTD-N0882-D
Not all CPU even of same type support all functions ex. i7-4770S & i5-4570S supports VPRO other
CPU types may not. Intel® Turbo Boost Technology 2.0 is supported by i5 and i7, as indicated in above
list of processors, and is enabling overclocking of all cores, when operated within the limits of thermal
design power, temperature and current.
Sufficient cooling must be applied to the CPU in order to remove the effect as listed in above table
(Thermal Guideline). The sufficient cooling is also depending on the maximum (worst-case) ambient
operating temperature and the actual load of processor.
Warning: Make sure sufficient airflow is always present around the components located below
the cooler. Different coolers are available on the market and some is not generating any airflow
!
or is blocking the airflow around these components, causing reduced lifetime.
It is recommended to use a cooler like the Kontron
PN 1046-6305 "KTQ77 Cooler".
The design of this cooler makes sure airflow is
always present around the components below the
cooler. Even if Fan is set to be off, it is still running
a minimum RPM (Rotation Per Minute).
Note: The temperature of the air blown out of the cooler must be less than 60ºC maximum in order not
to overheat components near the CPU. However most CPU's requires maximum 57,4ºC, so in order not
to violate the CPU specification the temperature of the air should be maximum ~55ºC.
Page 15
Air sucked in to the cooler
Air blown out of the cooler
System Specification
Components below the cooler
KTQ87/mITX Users Guide
Advertisement
Table of Contents
