Crossover Network Setup - Kenwood DDX8032BT Instruction Manual

When the values of center speaker and front
speakers increase, they are virtually moved
forward. When the values of rear speakers and
subwoofer increase, they are virtually moved
backward.

Crossover Network Setup

You can set a crossover frequency of speakers.
1 Select the speaker to set the crossover
1
2
2
3
3
4
1 Sets the High Pass Filter of the center
speaker.
2 Sets the High Pass Filter of the front speaker.
3 Sets the High Pass Filter of the rear speaker.
4 Sets the Low Pass Filter of the sub woofer.
5 Switches to the crossover setup screen.
6 Returns to the "Setup Menu" screen.
2 Display the Crossover setup screen
3 Set the crossover
7
8
9
7 Sets the crossover frequency.
When center speaker, front speaker or rear
speaker is selected in step 1:
High Pass Filter adjustment
When Subwoofer is selected in step 1 :
Low Pass Filter adjustment
8 Sets a crossover slope.
9 Sets the phase of subwoofer output (it is
displayed when the subwoofer crossover
frequency is set).
⁄
• When you select a speaker type on the Speaker Set Up
• During crossover setup, the speaker type is set to "User"
5
6
10
The phase is reversed 180 degrees when set
to "Reverse".
p Returns to the "Audio Setup" screen.
screen, the crossover frequency setup is cleared.
on the Speaker Set Up screen.
English 63