Advertisement
CLEANING AND MAINTENANCE
1.
Turn the control switch to the speed '0' and wait for the motor to stop operating.
2.
Unplug the plug from the wall outlet.
3.
Disassemble the juicer( refer to disassemble the appliance).
4.
Clean the following parts with soapy water. A mild detergent is recommended to clean the parts.
Rinse the parts well and dry thoroughly.
• pulp container
• pulp chute/ juicer cover
• food pusher
• juicer jug assembly
• spout cover
• juice jug
• feeder tube
5.
Rinse the stainless steel grater and filter assembly/ cutting blades with clean water. Use the
cleaning brush gently clean away pulp from the filter and cutting blades. If the holes of the filter are
blocked with pulp, soak the filter assembly into hot water to remove the pulp and clean with the
nylon brush again. Allow to dry on a cloth or paper towel before reassembling the juicer.
6.
Wipe the motor base and safety locking arms with a soft dry cloth.
HELPFUL HINTS
1. A small amount of lemon juice can be added into the apple juice to prevent juice from turning into
brown colour.
2. Do not use bananas or avocados as they do not contain juice and will clog the juicer.
3. Allow the juicer to run for one minute before turning '0' speed to allow any excess juice to be extract
from the pulp.
4. Plastic bag can be put in the pulp container for easy clean-up.
Technical Specifications:
Voltage : AC 220- 240V, 50Hz
Power : 500W
Advertisement
