Table of Contents
Advertisement
Quick Links
For The Warranty Terms & Conditions, Please Refer To Warranty Certificate.
JUICE EXTRACTOR
Model: EJE-A0435(WH)
Owner's Manual
Please read this manual carefully
before operating your set.
Retain it for future reference.
Record model number and serial
number of the set.
See the label attached on the set and
quote this information to your dealer
when you require service.
Advertisement
Table of Contents
Related Manuals for Elba EJE-A0435
Summary of Contents for Elba EJE-A0435
- Page 1 JUICE EXTRACTOR Model: EJE-A0435(WH) Owner’s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the set and quote this information to your dealer when you require service.
- Page 2 IMPORTANT SAFEGUARDS When using this appliance, basic precautions should always be followed, including the following: Read all instructions before use. Do not use the appliance if the stailess steel grater and filter assembly is damaged. Do not contact the plug or power cord with wet hands. Do not let the plug remains plugged when not in use.
- Page 3 DESCRIPTION OF PARTS 1. Food pusher 2. Pulp chute / Juicer cover 3. Stainless steel grater and filter 4. Spout cover 5. Safety locking arms 6. Juice jug cover 7. Juice jug 8. Pulp container 9. Control switch • 0 stop/ no power •...
- Page 4 • Hold the stainless steel grater and filter assembly as per figure 2. • Install the stainless steel grater and filter assembly into the motor base. • Twist the filter assembly and gently push down until it is seated on the motor base. NOTE: The top edge of the grater should not be higher than the edge of the spout cover when properly installed.
- Page 5 OPERATING THE APPLIANCE 1. After assembling the appliance, connect the plug into the wall outlet. 2. Power on the appliance and the light indicator will be on (in blue). WARNING: Before power on the appliance, make sure the control switch is turned to speed “0” (no power).
- Page 6 CLEANING AND MAINTENANCE Turn the control switch to the speed ‘0’ and wait for the motor to stop operating. Unplug the plug from the wall outlet. Disassemble the juicer (refer to disassemble the appliance). Clean the following parts with soapy water. A mild detergent is recommended to clean the parts. Rinse the parts well and dry thoroughly.
Need help?
Do you have a question about the EJE-A0435 and is the answer not in the manual?
Questions and answers