Connecting Your Tv; Back Connections; Connecting An Audio System - Toshiba 22AV700A Owner's Manual

Back Connections

Connection example:
TV back view
TV back view
22AV700A
HDMI 1/2 RGB/PC
1
PC / HDMI(1)
4 4
AUDIO
2
(3) Component 1
VIDEO
Digital
L/
Y P P AUDIO R
Audio
B R MONO
L/
Y P P AUDIO R VIDEO
B R MONO
(4) Component 2
2 3
26AV700A / 32AV700A
HDMI 1/2 RGB/PC
1
PC / HDMI(1)
4 4
AUDIO
2
(3) Component 1
VIDEO
Y P P L/ R
AUDIO
B R
MONO
Digital
Audio
L/
Y P P AUDIO R VIDEO
MONO
B R
(4) Component 2
2 3
32CV700A / 40CV700A / 40RV700A
HDMI 1/2/3 RGB/PC
1
PC / HDMI(1)
4 4
AUDIO
2
(3) (Component1)
Y P P AUDIO R
L/
B R
MONO
3
Digital
Audio
L/
Y P P AUDIO R
B R MONO
(4) (Component2)
2 3
• Before connecting any external equipment, turn off all
main power switches. If there is no switch, remove the
mains plug from the wall socket.
• The unauthorized recording of television programmes,
DVDs, video tapes and other materials may infringe
upon the provisions of copyright law.
• The COMPONENT VIDEO INPUT consists of
three component video signals (Y, P
and provides the best picture performance. These
terminals can only be used with the component video
compatible equipment e.g. DVD video player, etc.
• Additional equipment and cables shown are not
supplied with this TV.
• TV OUTPUT
That will only support ATV/DTV signal to display out or
by VCR TV signal recording use.

Connecting your TV

Connecting your TV
1
(1)
L/ AUDIO R
MONO
VCR(Recording)
1
2
L/
AUDIO R
MONO
TV
DVD video player
(with component video
outputs) or
(1)
L/
AUDIO R
MONO
3
1
L/
AUDIO R
MONO
TV
Set Top Box
4
(1)
VIDEO L/ AUDIO R
MONO
1
HDMI or DVI device
L/
VIDEO AUDIO R
MONO
TV
/C , P /C )
B B R R

Connecting an audio system

You can enjoy high quality dynamic sound by connecting
the TV to an audio system.
Notes:
• DO NOT connect the DIGITAL AUDIO output terminal
to the AC-3 RF input of a Dolby Digital Receiver with a
built-in Dolby Digital decoder.
• Connect the DIGITAL AUDIO output terminal to the
Optical or Coaxial input of a Receiver or Processor.
• Refer to the owner's manual of the connected
equipment as well.
• When you connect the TV to other equipment, be sure
to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• The output sound of the TV has a wide dynamic
range. Be sure to adjust the audio amplifier's volume
to a moderate listening level before turning on the
power. Otherwise, the speakers and your hearing may
be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect
the TV's power cord. If you leave the amplifier power
on, the speakers may be damaged.
Warning:
When you are connecting (via the DIGITAL AUDIO
output terminal) an AV decoder that does not have
Dolby Digital or MPEG decoding function, be sure to set
PCM in SPDIF Type under SOUND menu. Otherwise,
the speakers and your hearing may be damaged by a
sudden high volume sound.
34