Table of Contents
Advertisement
Analogue Channel Fine Tune
When the reception is poor, you can use this function to
do the fine tuning.
1
In the SETUP menu, press ▲ or ▼ to highlight
Channels and press ► or
2
Press ▲ or ▼ to highlight Analogue Channel Fine
Tune and press
to select.
3
Highlight and press
4
Press ◄ or ► to adjust the frequency. Press ◄ to
decrease and ► to increase the frequency.
Channel Edit
Network Name:
Channel Number:
Channel Name:
Frequency
Colour system
Sound system
Set
OK
Reset TV
Selecting Reset TV will reset all TV settings to their
original factory default settings, excludes OSD Language
and Channels.
1
In the SETUP menu, press ▲ or ▼ to highlight Reset
TV and press ► or
2
Select OK to confirm, or select Cancel to exit.
Automatic Power Down
The TV will automatically turn itself off (standby) after
approximately 4 hours, if you do not touch the control
buttons on the remote control or on the TV control panel.
1
In the SETUP menu, press ▲ or ▼ to highlight
Automatic Power Down.
2
Press ◄ or ► to select On or Off.
17
Getting started
to select.
to select the channel.
ABC Sydney
2
ABC HDTV
191.5
Auto
B/G
Select
Back
Exit
RETURN
EXIT
to select.
General Control
Selecting programme positions
After you have tuned the TV, you have several ways to
navigate through all programmes:
• Press the Number buttons (a channel number has
3-digits) and you may omit the leading zeroes, which
will be appended automatically; (Please note that if
you have channels with different frequencies but the
same channel number, the TV will always tune to the
first channel that has been stored into the channel
database. To view the other duplicating channels, you
can select the channels by using
• Press
/
to view the previous and next
programme. The channels are arranged in ascending
order according to the channel number.
Switching between two programme
positions
You can switch two programme positions without entering
actual position number each time.
1
Select the first programme position you want to view.
2
Select the second programme position with the
Number buttons (0-9).
3
Press
, The previous channel will be displayed.
Each time you press
, the TV will switch back and
forth between the two programme positions.
Stereo and Bilingual transmissions
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
Stereo...
Press to select Stereo or Mono.
Bilingual... Bilingual transmissions are rare. If they
are transmitted the word Dual will display. Choose
the required programme number and if the word Dual
appears press
to select Dual 1, Dual 2 or Mono.
/
buttons.)
Hide quick links:
Advertisement
Table of Contents
